Hamas threatened "jihad", and Israel stood firm against the suffering of Gaza people.

Special topic: Israeli army’s large-scale air raid on Gaza Strip.

  BEIJING, Dec. 29 (Xinhua)-Hamas leaders who control the Gaza told the Palestinian people that no matter what force Israel uses against them, Gaza will never give in to Israel. According to Iranian media reports, Hamas’s foreign propaganda officials even said that "the only way to fight back against Israeli crimes is to launch jihad and uprising".


  After Israeli air strikes in Gaza killed 287 people, a pro-Hamas website published a letter from Hamas leader Chana to the Palestinians, which said: "We will not leave our land, we will not surrender, and we will not kneel down and give up." Chana said: "There are blood everywhere and martyrs everywhere. There may be more people injured and sacrificed, but Gaza will never surrender. "


  In the face of Hamas’s threat, the Israeli side showed no weakness and took a tough attitude. The Israeli cabinet passed a decision on the 28th to recruit reservists. It is estimated that Israel will mobilize at least 6,500 reservists. Israeli authorities also said that they bombed more than 40 tunnels on the border between Gaza and Egypt for smuggling.


  Israel also warned that it would launch a ground offensive against Gaza if the current air strikes failed to stop Palestinian militants from firing rockets and mortars into Israeli territory. At a cabinet meeting, Israeli Prime Minister Olmert warned his colleagues that the battle would be "long, painful and difficult".


  Both the Hamas organization and the Israeli army have their own "weapons". The Israeli side dispatched regular troops, tanks and military aircraft to carry out large-scale military operations, while Hamas dispatched suicide bombers, guerrillas and rocket launchers. The intransigence between the two sides will inevitably lead to greater casualties, and the first victims are the people.


  According to current statistics, since the Israeli bombing of Gaza, 287 Palestinians have been killed and nearly 1,000 injured. The major hospitals and clinics in Gaza are currently overcrowded, and the humanitarian crisis is very serious. Doctors say they can’t cope with such a large number of injured people. They said that there is a shortage of hospital beds and medicine, and more plasma is urgently needed to help the wounded.


  Egyptian officials said on the 28th that a large number of Palestinians wanted to cross the border and enter Egypt to escape Israeli air strikes. The local refugee problem will worsen, and it will inevitably trigger the resentment of refugees. Terrorist attacks against Israel may increase greatly, and ordinary people will still be victims.


  Although the Hamas organization and Israel’s tough attitude at this stage can win the support of some Palestinians and Israelis respectively in a short period of time, with the stagnation of the peace process, large-scale conflicts are in danger of being prolonged, and ordinary Palestinians and Israelis are still the ultimate victims.

Editor: Li Erqing

Gree Electric: The company focuses on the lightweight automobile market. The CNC machine tools extend from the rod-type PACK machine to the die-casting market, cut into the die-casting integration pro

  () Financial Research Center on August 11th, some investors asked () questions. Hello, Secretary General! I saw Gree’s machine tools and other products participate in various business exhibitions this year. I wonder what the effect is? The transformation of the company from Gree Electric to Gree Electric has always been the expectation of all shareholders. Now those industrial products have been recognized by the market, and I look forward to your reply!

  The company replied, Dear investors, hello! The company focuses on the automobile lightweight market, and the CNC machine tool extends from the rod PACK machine to the die-casting market, cutting into the die-casting integration project in the automobile field, and launching a full series of products such as large gantry machining center, five-axis CNC machine tool, vertical CNC machine tool and horizontal CNC machine tool. Five-axis CNC machine tools can process complex curved materials and are widely used in new energy vehicles, general machinery and other fields. In addition, the company has successfully entered the high-end market in North America and Europe, and built high-end CNC machine tool demonstration projects in developed areas such as North America and Europe, and will continue to enhance the overseas market influence of the company’s intelligent equipment in the future. Thank you for your interest in the company.

Geely emgrand PK changan yidong PLUS, how to choose? Netizen: Choose Geely Emgrand with your eyes closed.

In the economy car market, and PLUS are both high-profile models. This paper will make a comprehensive comparison between Geely and Changan PLUS in terms of appearance design, internal configuration, power performance, safety performance and after-sales service, so as to help consumers make more informed car purchase decisions.

First, the design and internal configuration comparison

Geely Emgrand and Changan Yidong PLUS are different in appearance design. Geely Emgrand adopts a more stable and atmospheric design style, with smooth body lines and a sense of business; Changan Yidong PLUS is younger and more fashionable, with a dynamic appearance. In terms of internal configuration, Geely Emgrand pays attention to comfort and luxury, and provides a wealth of configuration options; Changan Yidong PLUS pays more attention to practicality and intelligent design, which is outstanding in space utilization and storage space.

Second, the power performance and fuel economy comparison

Power performance and fuel economy are one of the important considerations in the process of car purchase. There are also differences between Geely Emgrand and Changan Yidong PLUS in this respect. Geely Emgrand is equipped with a variety of options for consumers, and its dynamic performance is relatively ordinary; Changan Yidong PLUS is equipped with an engine that pays more attention to fuel economy and has lower fuel consumption.

Third, the safety performance comparison

Safety performance is one of the factors that can’t be ignored in the process of car purchase. Geely Emgrand and Changan Yidong PLUS have good performance in safety configuration, equipped with a number of active and passive safety systems, such as anti-lock braking system, etc. Consumers can choose according to their personal needs and safety features.

Fourth, after-sales service comparison

After-sales service is an important aspect that car owners pay attention to. Geely Emgrand and Changan Yidong PLUS have a good reputation in after-sales service, providing comprehensive warranty and maintenance services. Consumers can comprehensively consider the reputation, service quality and maintenance ability of local dealers.

To sum up, for Geely Emgrand and Changan Yidong PLUS, which one is more worth buying needs to be weighed according to personal needs. If you pay more attention to the stable and atmospheric design, comfort and luxury, Geely Emgrand is a good choice; If you pay more attention to young fashion, practicality and fuel economy, Changan Yidong PLUS is more suitable. Of course, consumers should also consider personal budget, actual car demand and after-sales service when buying a car, and make the final decision.

(The above views are for reference only, and the final car purchase decision should be weighed and judged according to the actual situation of the individual. )

Foxconn’s "escape" to the United States is an uncertain gamble

Foxconn finally ran away. US President Donald Trump)7 announced on July 26th that Foxconn plans to build a new factory in Wisconsin to fulfill its commitment to invest in the United States. Foxconn will invest $10 billion to build a new LCD factory.

It is said that this will be the largest new investment by a foreign company in the United States in history, but it is only the first of many investment plans of Foxconn in the United States, and there will be more in the future, creating 3,000 new jobs for Wisconsin and having the opportunity to explore the scale of 13,000 people. Trump is quite satisfied with Guo Taiming: "He is a great businessman anywhere in the world."

Getting Foxconn to produce in the United States is a dividend for Apple and American manufacturing. Revitalizing the manufacturing industry in the United States and hollowing out the treatment industry can also be regarded as a great achievement project during Trump’s tenure. It has a strong demonstration effect and driving effect on the return policy of American manufacturing industry. In the past 40 years, the scale of industrial employment in the United States has fallen sharply. Therefore, for many years, the slogan that the United States has been shouting is to let the manufacturing industry return.

For the United States, the purpose of manufacturing return is more about employment and the adjustment of economic structure. Therefore, the United States is striving for advanced and high-quality foreign capital and manufacturing giants to enter. The problem in the United States is that the labor cost is high, the scale of manufacturing industrial clusters is not as good as that in China, and the degree of automation is high, so the number of jobs and employment is getting less and less.

Moreover, Foxconn is the largest supplier and foundry of iPhone. Since the Obama era, the US government has continued to put pressure on Apple, hoping that Cook can move the manufacturing of Apple products back to the United States.

Foxconn’s establishment of a factory in the United States can obviously drive Apple to bring some of the production capacity of the industrial chain back to the United States. It can also help Apple to check and balance Foxconn at home. For example, in the future, Apple can increase its control by cooperating with Foxconn to build factories, investing in capital, and infiltrating forces such as technology operation and placement of Apple executives and core technicians. Even Foxconn’s factory building behavior will also play a leading role for many component manufacturers in Apple’s supply chain.

As early as last year, Apple proposed to Foxconn and Pegatron United Technologies the idea of withdrawing all Asian production lines to the United States. At that time, many suppliers did not respond, and Pegatron Technology refused this proposal. Tong Zixian, chairman of Heshuo, said earlier that many suppliers are not interested in building factories in the United States, because the supply chain of the electronics manufacturing industry is huge and complex, and it is very difficult to achieve pure American production.

But now that Foxconn has moved to the United States, many manufacturers in the Apple supplier group may start to feel anxious, which will promote the idea of those wavering manufacturers moving.

Therefore, Foxconn’s investment in the United States has brought great benefits to Apple, because in terms of innovation, if designers, engineers and workshop production employees can gather in the same eco-industrial environment instead of scattered in different countries, close business intersection can enhance their integration and understanding, which can bring greater creativity. Obviously, this is a common dividend between Apple and American manufacturing.

For Foxconn itself, going to the United States to build a factory or completing its industrial upgrading to seek the inevitable road of transformation will help break the brand label of the foundry. Moreover, exporting to domestic market can not only greatly increase Foxconn’s brand premium, but also increase the price and profit of its products.

Trump grabbed Foxconn to build a factory in the United States, but it was difficult to solve the ills of American manufacturing in a short time. On the one hand, the American manufacturing industry has long transferred its production to the third world countries, and only retained R&D and design at home, showing a trend of "de-hard assets". Since the 21st century, the competitiveness of American manufacturing industry has begun to show a downward trend. Nowadays, there are fewer and fewer skilled technical workers in the United States.

On the other hand, the manufacturing industry needs industrial chain clusters, but in the United States, the manufacturing industry has been hollowed out after moving out. Now, if you want to move back and rebuild the manufacturing industry chain clusters, you have lost the talent, technology and industrial chain foundation.

Only relying on political rights can attract the laws of global capital in a short time, but in the long run, the rise and fall of industries and the flow of talents have its long-term economic laws, and capital needs global reproduction and expansion, rather than running around political calls.

For Foxconn, the trouble to set up a factory in the United States is the lack of a large number of skilled industrial workers and supporting facilities for the production of raw materials and parts, and there is no perfect upstream supply chain industrial cluster. It takes time to hire a large number of skilled industrial workers, and the cost rises sharply.

Germany’s Le Monde said that in less than 20 years, factories in the United States disappeared by nearly a quarter. Friedman, a famous American columnist and author of "The World is Flat", once said that the United States is now a small town with 200 start-ups, each of which employs 50 people. It is difficult for the traditional "Made in America" manufacturers to come back.

Therefore, for Foxconn, the most difficult thing is to obtain a large number of skilled workers and related supporting industrial chains, although it may obtain tax incentives provided by local, state and federal governments in the next few years. Industrial agglomeration plays an increasingly important role in manufacturing industry.

On the other hand, the region has little connection with Foxconn’s suppliers and customers and industrial layout, and there is not much reserve of skilled workers, let alone industrial agglomeration, which means that Foxconn is faced with many uncertain risks and has to bear too much infrastructure construction costs.

Because OEM manufacturers like Foxconn need to rely on numerous suppliers’ industrial support to produce, Foxconn will almost start to cultivate talents and develop industrial support in this state, which will drive the development of relevant supply chains in the United States and directly or indirectly bring many employment opportunities. Therefore, in the final analysis, the benefits that Foxconn brings to this state in the United States still far outweigh the benefits that Foxconn has gained.

Therefore, although people know that a profit-oriented enterprise should be counted as an economic account, here at Foxconn, there is also the meaning of political flattery and accommodating people.

Analysts from foreign research institutions have clearly pointed out that Foxconn is trying to avoid the increasing pressure from the US government, which is a political expedient. Because from a commercial point of view, it is not so reasonable to choose to build a factory in the midwest of the United States rather than other regions.

Moreover, it is still a question whether Foxconn’s corporate culture is suitable for Americans, because today, it is difficult for Americans to return to the assembly line and work like blue-collar workers in China, Viet Nam, Southeast Asia and other countries.

Because industrial correlation, demand, environment and industrial ecological correlation are the main driving factors of investment choice. However, Foxconn has not settled this account here. After all, where the depression effect can be generated, where will the money flow? Here at Foxconn, there is obviously a sense of political flattery.

After all, Trump pressured Apple to move the iPhone back to the United States for production. Foxconn needs to hold Apple’s thigh tightly and share the pressure for it in order to win more orders from Apple in the future. In addition, in response to Trump’s new administration’s call for the manufacturing industry to return, it will make some profits, but it will also facilitate Foxconn to go further in the US market and build its brand awareness and influence in the US manufacturing field and internationally.

On the other hand, although the American manufacturing industry itself is declining, it has always been at the top in terms of technology research and development and accumulation and the right to speak in the industrial chain. To become a super giant with upstream and downstream connectivity, Foxconn needs to stand on the basis of American manufacturing and technology research and development. Complete the transformation.

Due to its own manufacturing genes, most employees of Foxconn have long been screws in the product line and rarely participated in upstream research and development. Although Foxconn faces the problem of skilled workers in the United States, it also has the opportunity to attract more cutting-edge scientific and technological talents, participate in the upstream R&D links of American manufacturing, and promote the overall innovation.

But generally speaking, in the modern economy, industrial agglomeration determines the position of manufacturing industry, and there is no integrated industrial related manufacturing cluster in the United States, so Foxconn’s establishment in the United States has mixed advantages and disadvantages, and it is still a gamble. Entering the United States does not mean that you can have global supply capacity. On the contrary, it is prematurely washed away by higher-dimensional industrial science and technology forces due to insufficient innate foundation.

At present, not only Foxconn and Softbank, but also many enterprises are on their way to the United States after the implementation of large tax cuts in the United States. Although they all have a little political contribution, it seems that the collective visit of international manufacturing companies to the United States has become a hot outlet.

For example, Samsung Electronics recently announced that it will invest 380 million US dollars to build a home appliance manufacturing factory in South Carolina. In February this year, Intel announced that it would invest $7 billion in building a semiconductor factory to produce seven-nanometer chips in the next three to four years. In May this year, some media reported that Infosys, a world-renowned software outsourcing giant, announced that it would invest in the United States and create 10,000 jobs. In March 2017, LG Home Appliances will also establish a new factory in the United States.

The collective action of global industrial capital may be based on the demand for optimal allocation of resources on the one hand, and on the other hand, it is based on showing kindness and standing in line with the Trump administration in order to obtain the new government’s policy dividend for manufacturing industry and find a new direction for industrial layout, so that the integration of manufacturing industry into the US market can enhance its international competitiveness and attract better technology and talents.

We know that manufacturing is the foundation of a country’s economy and the guarantee of people’s livelihood and employment stability. This is an important reason why the United States does not hesitate to compete for manufacturing giants with tax, cost and policy concessions on a global scale.

As early as 2016, during the two sessions of the National People’s Congress, Cao Dewang submitted a proposal, saying that the rising labor in China, transportation costs, high industrial land costs, tax burden, resource prices, etc., made the unreasonable cost factors more prominent. On the contrary, China’s neighboring countries with late-developing advantages such as demographic dividend are creating conditions to attract investment.

At present, in the United States, except that labor is higher than that in China, the costs of energy, land, logistics and finance are all lower than those in China. In particular, it is mentioned in the industry that the land price difference between China and the United States is as high as nine times, and the tariff problem in the United States, if you export after manufacturing in the United States, the product price is almost the same, and you can get a higher brand premium. So early layout in the United States is obviously a more cost-effective choice.

It is also an indisputable fact that part of China’s manufacturing investment is flowing to the United States. According to the data of the Ministry of Commerce, by 2015, the manufacturing industry has surpassed the financial industry and become the most important industry for China’s direct investment in the United States. Wang Shouwen, Vice Minister of Commerce, revealed that in 2016, the scale of foreign capital utilization in China is expected to be the same as that in 2015. Compared with the year-on-year growth rate of 6.4% in 2015, China’s attracting foreign investment slowed down significantly last year.

Moreover, the domestic manufacturing industry has always been given the impression of cheap, backward production capacity and low-end sweatshops, which has long been stigmatized. Nowadays, young people in China are increasingly reluctant to flow into the manufacturing industry. Zong Qinghou, chairman of Wahaha, also complained before: the taxes and fees in the real economy are relatively high, the profit rate is very low and it is very hard, and many people are unwilling to work in the real economy.

Many people don’t want to work in the real economy, and the environment of the real economy is not good, which also makes China local and foreign manufacturing investors in China start to weigh and wait and see those countries that release friendship and dividends.

An important reason why the high-end upgrading of domestic manufacturing industry has not been successful is that the profits of manufacturing industry have not been used to invest in high-end technology research and development to complete the transformation from low-end cheap factories to capital-intensive and technology-intensive enterprises, but have been used to participate in shares or flow into real estate and other hot industries.

In current China, it is not clear which industries can replace real estate to drive growth. On the other hand, China’s manufacturing industry is also experiencing the same path as American manufacturing. For example, we can see that many of Shenzhen’s once prosperous clothing and toy factories have moved to Vietnam and other countries with lower costs.

Now, some consumer electronics manufacturers are also moving out. Many enterprises are saying that they will use robots instead of manpower to cut costs, while some enterprises have already replaced machines on the assembly line. At this time, the United States shouted that the manufacturing industry was returning, and Foxconn moved its factory to the United States. In fact, it was a warning to China’s manufacturing industry.

We know that China’s manufacturing industry and the real economy are abnormal in the current environment. It is not that the United States naturally develops to the top and then naturally expands globally to Zhang Zhilu. Instead, when the industrial base and scientific and technological development level of manufacturing industry are still in the development stage, capital, labor and talents are accelerating away from manufacturing industry, and then flow to real estate, Internet industry, financial industry and other fields where money is fast coming, and there is a lack of real respect and attention to the real economy and manufacturing industry.

On the one hand, the United States is vigorously promoting measures to attract outstanding global manufacturing enterprises, while at home, including Samsung, Toshiba, Panasonic and Sony, they are all considering reducing their capital in China and focusing on countries with lower costs.

If the manufacturing industry is marching towards the era of Industry 4.0, but the soil, cost, atmosphere and technical level of China’s manufacturing industry are still not enough to support the development and cost-effective advantages of high-end manufacturing industry, then in the future, more and more outstanding manufacturing entities will run to countries with more dividends. Of course, many international high-end manufacturing entities will not completely abandon China’s manufacturing industry at present, but more and more will tend to focus on both hands and put their eggs in multiple baskets.

Today, with the gradual loss of demographic dividend, the competitive advantage of domestic manufacturing industry and its attraction to foreign investment cannot still rely on lower-cost labor resources. Therefore, what the current manufacturing industry leaves us is not only reflection, but also crisis.

 

European headlines: US and Europe strengthen military aid to Ukraine? Calculate the accounts and listen to the voices of the people!

September 21st is the United Nations International Day of Peace. On September 19th, just two days before the International Peace Day, the "Contact Group on Ukraine" led by the United States held another meeting at the American military base in Ramstein, Germany. This is the 15th meeting of the group since its establishment one year ago, and the focus of discussion is still on strengthening military assistance to Ukraine. The United States says it will train Ukrainian pilots to fly F-16 fighters at home. Germany announced that it would add 400 million euros worth of military support to Ukraine to purchase ammunition, generators and other equipment. The Czech Republic, Denmark, the Netherlands and other countries have also indicated that they will further provide weapons to Ukraine.

In the face of western governments’ increasing military aid, European folks have made a completely different voice. During the week from September 18 to 24, 17 anti-war organizations in Germany joined forces to hold "Peace Week" activities in various parts of Germany to protest against the Western supply of weapons to Ukraine to ignite the Russian-Ukrainian conflict and demand an immediate ceasefire.

German people WolfgangWe are here (Berlin) demanding an immediate ceasefire. As pacifists, we oppose NATO and military means. Military means is not the solution to the conflict between Russia and Ukraine. The Russian-Ukrainian conflict can only be resolved through diplomatic means.

The west may not be able to support Ukrainian ammunition demand.

Since the conflict between Russia and Ukraine. The United States and western countries have constantly promised that "as long as necessary, military aid to Ukraine will stick to the end." But can the United States and the West really do it?

The British "Economist" recently wrote that although these promises sound "like iron", it depends on two uncertain variables: first, whether the West has the ability to provide enough weapons and ammunition for the Ukrainian army, and second, whether the current political will can be sustained.

For the first point, the argument used by western media is that the total gross national product of NATO member countries is 12 times that of Russia, and its economic and military strength is far above that of Russia. But I’m afraid the fact is not as simple as the western imagination.

Estonian Defense Ministry official Cousty Salm pointed out that even in Estonia, where the production cost is relatively low, the cost of manufacturing each new shell is about 5,000 to 6,000 US dollars; The cost in Russia is only 60,000 rubles, or about 620 dollars. This wide cost gap makes the economic advantages of western countries disappear. At the recent annual meeting of NATO Chief of Staff, Admiral Rob Bauer, Chairman of NATO Military Committee, admitted that Ukraine’s long-term demand for weapons and ammunition exceeded NATO’s capacity, and the rising price of weapons and ammunition also increased the procurement cost.

Rob Bauer, Chairman of NATO Military CommitteeThe defense ministers expressed concern about the backward production capacity of the whole alliance. The delivery time of weapons is constantly delayed, and the prices of equipment and ammunition are rising. Now the exact same equipment is more and more expensive. Ukraine needs a huge amount of weapons and ammunition. This has been the case in previous wars, which is not new in itself. But the scale and usage of Ukraine exceed our production capacity.

In addition, the military equipment delivered by the West seems to be very problematic. Not long ago, Ukraine rejected 10 "Leopard" tanks delivered by Germany with great disgust, on the grounds that their "technical state is not ideal". Military experts said that the "Leopard -1" main battle tank was the technical level in the 1960s. The "Leopard -1A5" provided by Germany to Uzbekistan has been in service for a long time, and after a long period of storage, the stability of its technical state has been greatly reduced. In the eyes of outsiders, western military aid to Ukraine is more like taking the opportunity to consume its old weapons inventory.

The Russian-Ukrainian conflict spilled over, and the people opposed the continued aid to weapons.

On September 22nd, a research report released by the Swiss National Bank showed that the Russian-Ukrainian conflict slowed down the economic growth of the European Union and "substantially" pushed up the inflation of the whole Europe. In the medium and long term, the negative impact of this conflict on the real economy may be even greater. "In one to two years, this impact may increase by about two times." Among them, Germany is the most affected.

As the largest economy in Europe, Germany has gone into recession because of the energy crisis caused by sanctions against Russia with the United States and the protectionist policy of its allies making huge war money. The economic forecast report released by the European Union this month shows that Germany’s economy will shrink by 0.4% this year, making it the only country with negative economic growth among the big EU countries. Hong Ke, a member of the German Bundestag, said that Germany’s traditional economic development model has been destroyed.

German left-wing MP HongkeThis is mainly because of economic sanctions, sanctions on energy, natural gas and oil, and Germany needs a lot of energy. Germany’s economic model is a combination of cheap energy, highly skilled workers and exports. Now Germany has blocked the cheap natural gas and oil from Russia, which need to be bought at a very expensive price in the world market, such as shale gas from the United States. This has a very serious impact on the German economy.

On the other hand, the protracted conflict has made people more and more disgusted. Gunnar Lin Deman, a member of the Berlin Regional Council, said that the German people paid three times the price for this war. At the same time, the German people are increasingly worried that the war may spread to themselves. From the initial field hospitals, to the "Leopard" tanks, and then to the Patriot missile system, the weapons provided by Germany to Ukraine have gradually escalated, causing public concern.

According to a recent survey, more than half of the German people are opposed to providing "Taurus" cruise missiles to Ukraine. German parliamentarian Hongke said that with the escalation of the war, the people’s attitude towards assisting Ukraine with weapons has changed.

German left-wing MP HongkeI am totally opposed to providing any weapons, especially more and more advanced weapons. Taurus is a cruise missile with a range of 500 kilometers. Now this topic has caused a heated discussion among the German public, and most Germans are obviously opposed. People’s attitude towards the delivery of weapons has changed, which was not the case before. Now people find that as long as more weapons are delivered, the conflict between Russia and Ukraine will be endless.

If there is any change in the United States, the European Union will be afraid of being alone

In addition to Germany, more and more countries find that the longer the conflict between Russia and Ukraine, the more difficult it is to protect their own interests. Poland, Ukraine’s "staunchest" ally, has loosened its position. The Polish Prime Minister said on the 20th that Poland will no longer provide weapons to Ukraine, but instead focus on increasing its own weapons inventory. The reason for all this is that the European Union has lifted the ban on the sale of Ukrainian agricultural products, and Ukrainian food has flooded into the EU, with neighboring Poland bearing the brunt.

However, the biggest variable is still in the United States. Next year is an election year in the United States, and aid to Ukraine is rapidly becoming a focus issue. The Republican Party of the United States has gradually begun to question the necessity of aid to Ukraine, and some Democrats believe that European allies should be "more active."

The British "Economist" reported that if the United States terminates its support for Ukraine, it will be difficult for Europe to raise enough cash and weapons to arm Ukraine alone.

Producer: Jiang Qiuyong

Editor Liang Mao

Reporter Yu Peng

Dress up the new 1.6L power Nissan Sylphy new model exposure

    [XCAR Information Original]

    Recently, some media have exposed a set of spy photos of the new Nissan Sylphy. There is almost no change in the design of this model. The biggest difference is that a new logo has appeared at the tail. This logo probably means that the new Sylphy will be equipped with a 1.6L engine from Tiida, and the model name will be changed.(Spy photos in the text Source: car home)

New sylphy
[New Sylphy spy photos]

    The Sylphy model in the picture adopts the "PURE DRIVE" logo, which appears on the body of the new generation of Trent and New Sunshine. Adopting this logo means that the new Sylphy will adopt the new PURE DRIVE series engines. speculateThe new Sylphy is likely to be replaced with a 1.6-liter engine from Xinda.

New sylphy
[The "PURE DRIVE" logo appears at the tail of the new Sylphy]

New sylphy
[The "PURE DRIVE" logo appeared on Nita]

    The new Tiida 1.6L engine is more excellent in power output and fuel economy, with the maximum power and torque output of 126 HP /154Nm, while the current Sylphy 1.6L engine is only 117 HP /153Nm. 

    In addition, as part of the PURE DRIVE powertrain, the new SylphyAfter replacing the new 1.6L engine, it is likely that a new generation CVT transmission will be adopted at the same time.

New sylphy
"CLASSIC" logo on the new Sylphy "

New sylphy
"Cash Xuanyi logo"

    In addition to the power upgrade, the logos of "SYLPHY" and "CLASSIC" appeared at the tail of the test car. It is speculated that the new generation of Sylphy will be launched next year.The current Sylphy is likely to be named "Sylphy Classic" and sold on the same stage as the replacement model.

    Editor’s comment:Sales of new and old cars under the same roof have appeared more and more in Japanese cars. At present, most of the main Japanese cars have been introduced into China. To expand the product line, there must be more "extreme measure", such as sales of new and old cars under the same roof, or tailor-made products for the China market. Obviously, the former has lower cost and higher success rate. After the replacement of Sylphy is listed, the price of "Classic Sylphy" is expected to be lowered, and the 2.0L model will be cancelled, focusing on cost performance, and its competitiveness is still not to be underestimated.

    More related articles:

    Add 1.8L power to replace Sylphy made in China in 2012.
    
http://info.xcar.com.cn/201112/news_366645_1.html

Chengdu Range Rover Sport Edition is on sale! The lowest price is 826,000, which is very beneficial today.

Welcome to the preferential promotion channel in Chengdu, car home, to bring you the latest and most affordable car information. At present, the high-profile in-depth preferential activities are being carried out in Chengdu, with the highest preferential margin reaching an astonishing 161,000 yuan, making the original high-end models more cost-effective. The starting price has been adjusted to 826,000 yuan. This attractive price gives car buyers the opportunity to experience the excellent performance and luxury of Range Rover Sport. If you want to know the discount details of specific models, you may wish to click the "Check Car Price" button in the quotation form to grasp this rare preferential opportunity and make your dream of buying a car come true.

成都揽胜运动版特价出售!最低售价82.6万,今日钜惠

Range Rover Sport Edition interprets the perfect combination of luxury and strength with its unique design language. The front face adopts bold and impactful design, the air intake grille is exquisite and atmospheric, and the matrix LED headlights are as sharp as eagle eyes, giving the vehicle a distinct recognition. The body lines are smooth and sculptural, showing the dynamic aesthetics and sports characteristics of Range Rover Sport Edition. Overall style, it combines luxury with sportsmanship, showing unparalleled visual impact and elegant temperament.

成都揽胜运动版特价出售!最低售价82.6万,今日钜惠

Range Rover Sport Edition shows its side charm with exquisite craftsmanship and dynamic design. The body size is 4946mm*2047mm*1820mm, and the wheelbase reaches 2997mm, creating a spacious interior space and the cornerstone of stable driving. The lines on the side of the car are smooth and powerful, outlining the perfect combination of luxury and strength. The front and rear wheel tracks are 1702mm and 1704mm, respectively, and the tires with the specification of 255/60 R20 not only ensure the driving stability, but also give the vehicle a unique visual impact. The exquisite style of the rim is in harmony with the proportion of the car body, which together creates the excellent side image of the Range Rover Sport Edition.

成都揽胜运动版特价出售!最低售价82.6万,今日钜惠

The interior design of Range Rover Sport Edition is unique, combining the dual elements of luxury and sport. In the spacious cockpit, the steering wheel is wrapped in high-grade leather or leather, which provides a comfortable grip and supports electric up and down+front and rear adjustment to ensure the individual needs of drivers. The 13.1-inch central control screen stands in the center, integrating multimedia, navigation, telephone and other functions, and supporting voice recognition control, which is convenient to operate and full of technology.

Seats, whether made of imitation leather or genuine leather, have been carefully built to provide a comfortable ride experience. The main and passenger seats are equipped with electric adjustment functions, including front and rear, backrest, height and lumbar support, and have heating, ventilation and memory functions. The second row of seats supports backrest adjustment, and the space is flexible to meet the needs of different passengers. The rear seats support proportional reclining, providing ample possibilities for luggage space or extra passengers. The overall interior design not only pays attention to practicality, but also does not lose luxury quality, creating a noble interior atmosphere.

成都揽胜运动版特价出售!最低售价82.6万,今日钜惠

The Range Rover Sport Edition is equipped with a powerful 3.0T L6 engine, with a maximum power of 265 kW and a maximum torque of 500 Nm. This engine works well with the 8-speed automatic manual transmission, which not only provides abundant power output, but also ensures a smooth driving experience.

To sum up, car home car owners think that although Range Rover Sport Edition is balanced in all aspects, what he loves most is its unique face design and brand charm. He said: "For me, the youth and fashion sense of Range Rover Sport Edition goes beyond its price tag, and the coherent lines and styles undoubtedly enhance the taste and status symbol of drivers." These feelings of the owner undoubtedly add more charm to this luxury SUV, which makes the Land Rover Range Rover Sport Edition stand out from many choices and become the heart of a driver with both taste and strength.

Brief history of glass

  Man made glass more than 5000 years ago. Archaeological evidence shows that in Egypt and Mesopotamia in 3000 BC, people have made some small handicrafts such as amulets and beads with glass.

  By around 1500 BC, people’s skills in making glass were becoming more and more mature, and the first glass container appeared in human history. The ancient Egyptians also mastered the technology of coloring glass. They know that adding copper powder to glass can make red glass, adding cobalt powder can make blue glass, and adding tin powder can make white glass … These colored glasses are used by some unscrupulous businessmen to pretend to be jewelry, deceiving many people.

  In the 1st century BC, Syrians invented the technology of blowing glass. With this technology, making glass becomes simple, fast and cheap. Since then, the glass industry has flourished in the Roman Empire and quickly spread to other countries under the rule of the Roman Empire.

  Around the 1st century A.D., the Romans discovered that adding a proper amount of manganese dioxide to glass could make colorless glass, so they began to make windows out of glass and install them on buildings. Although the optical performance of glass at that time was very poor, glass windows were still "standard" for buildings in Rome, Pompeii and other places.

  In the 8th century, Venice concentrated a large number of glass workers and became the glass manufacturing center at that time. Later, with the progress of science and art, people "played" more tricks, such as dyeing paint on glass and drawing colorful patterns. Many churches we see now have stained glass windows, which is the architectural style left over at that time.

  In the mid-15th century, a glass worker in Venice invented a new type of super transparent glass. Soon, this new type of glass was used to make telescopes, thermometers, flasks, microscopes and other scientific instruments, which led to many important scientific discoveries.

  Around the 18th century, the glass manufacturing center in Europe moved from Venice to Britain. At that time, the output of British glass factories was very high. At one time, the British government would levy taxes based on the number of windows in each house, on the grounds that wealthy families would install more windows, and of course they should pay more taxes. However, "there are policies above and countermeasures below", and many families simply blocked the windows in order to avoid paying taxes-this story shows that the use of glass was quite common in Britain at that time.

  Since the industrial revolution, steel and glass have become important building materials for modern architecture. In 1851, Britain built a "Crystal Palace", which only used steel and glass. This miraculous building was also the exhibition hall of the first World Expo in London. In 1950s, a German architect innovatively covered the facade of the building with a layer of glass, which made the appearance of the building look unprecedented. This innovative design can be successful, on the one hand, because there is a reinforced frame inside the modern building, and the facade does not need to bear the weight of the whole building; On the other hand, because the strength of glass has become higher. So many skyscrapers we see now have glass facades.

  Nowadays, scientists and engineers have developed a variety of glasses, which have important uses in many fields. For example, there is a kind of glass that can quickly transmit network information, that is, optical cable, which is filled with thousands of glasses as thin as hair, in which communication signals shuttle in the form of light and quickly transmit information to all parts of the world.

  Sand and glass

  The main component of glass is silica, that is, Shi Ying, which is one of the most common minerals on the earth. The sand that can be seen everywhere is actually a small particle in Shi Ying. When Shi Ying is heated to 1400℃, it will melt, then become soft and become a transparent, viscous liquid-then it will be cooled and shaped, and then the glass will be finished.

  How did sand become glass?

  On the atomic scale, silicon dioxide is composed of silicon atoms and oxygen atoms, and they are arranged in order in Shi Ying. For example, a group of silicon atoms and oxygen atoms are neatly arranged to form a "queue" with specific arrangement rules, and the whole "queue" is Shi Ying particles. A structure like this, which consists of a large number of microscopic substance units (such as atoms and ions) arranged in an orderly manner according to certain rules, is called a crystal.

  After Shi Ying melted, its internal crystal structure was destroyed, or the original "queue" was disrupted, and silicon atoms and oxygen atoms began to "run" freely, making Shi Ying change from solid to liquid. Of course, if the liquid Shi Ying can be cooled quickly, the crystal structure will be re-formed, just like the silicon atoms and oxygen atoms that "run" at will "stand" in the original position in the queue again.

  However, if the cooling speed is too fast, so that silicon atoms and oxygen atoms can’t return to their original positions, then they can only be condensed in their current positions. Therefore, the final glass is like a snapshot of liquid Shi Ying. Scientists have a special name for this state of solid, called "amorphous solid", which means that this kind of solid is different from crystal, and there is no orderly arrangement rule in its internal structure.

  Why is glass transparent?

  We can’t go straight through the glass, but our eyes can see the objects on the other side through the glass. Why?

  We can see an object because the light is reflected or scattered after it reaches this object, which makes some light enter our eyes and let us see the shape and color of the object. Only a part of light energy is received by our eyes, and the rest is absorbed or intercepted by objects.

  How much light an object can intercept depends on the kind of molecules or atoms that make it up.

  Most of the atoms in the glass don’t intercept light, and almost all the light that reaches the glass can be received by the eyes (glass can intercept ultraviolet light, but our eyes can’t see ultraviolet light). In addition, glass is not crystal, and there is no edge edge edge of crystal structure inside, so it will not scatter light. So, when the light reaches the glass, it will go straight through without changing its direction.

  However, if a piece of glass is slightly thicker in some places, the propagation path of light will be bent, which is the working principle of a prism.

This article is from Science Illustrated.

BMW i4 in Xishuangbanna is on sale, with a maximum discount of 115,000 yuan! Act quickly.

[car home Xishuangbanna Preferential Promotion Channel] Recently, a large-scale preferential activity was ushered in in Xishuangbanna, which attracted much attention. At present, the maximum preferential amount reached an astonishing 115,000 yuan, which reduced the minimum starting price of this luxury electric car to 314,900 yuan. Interested friends, please click "Check the car price" in the quotation form, and strive for higher discount.

西双版纳宝马i4正在优惠,最高优惠11.5万!赶快行动

BMW i4 stands out with its unique front face design and dynamic lines. Its air intake grille adopts a closed design, which shows its pure electric identity without losing the iconic characteristics of the BMW family. On the whole, the exterior style of BMW i4 is both sporty and scientific, which is impressive.

The length, width and height of BMW i4 are 4785mm, 1852mm and 1455mm respectively, and the wheelbase reaches 2856mm. The side lines of the car body are smooth and matched with 18-inch rims, in which the front wheel tyre size is 245/45 R18 and the rear wheel tyre size is 255/45 R18, which further enhances the sense of movement and handling performance of the car.

西双版纳宝马i4正在优惠,最高优惠11.5万!赶快行动

The interior style of BMW i4 is full of modern technology and luxury atmosphere. The center console is equipped with a 14.9-inch high-definition touch screen, which integrates multimedia system, navigation, telephone and air-conditioning voice recognition control system, making it easy to operate. The steering wheel is made of leather, which feels comfortable and supports manual adjustment up, down and forward to meet the needs of different drivers. There are multiple USB and Type-C interfaces in the car, two in the front row and two in the back row. At the same time, the front row is also equipped with wireless mobile phone charging function, which provides convenience for passengers. In terms of seats, both the driver’s and driver’s seats support multi-directional adjustment, including front and rear, backrest, height, leg rest and lumbar support, and the front seats have heating function. The seat material of BMW i4 is rich, and you can choose imitation leather, genuine leather or fabric/suede materials to meet the individual needs of different consumers. In addition, the driver’s seat also has an electric seat memory function, which improves the driving experience. The rear seats support proportional tilting, which further enhances the practicability of the vehicle.

西双版纳宝马i4正在优惠,最高优惠11.5万!赶快行动

BMW i4 is equipped with a high-performance motor with a maximum power of 250 kW and a maximum torque of 430 Nm, which provides excellent power performance for drivers.

According to the owner’s evaluation, the design of BMW i4 is really impressive. He said: "The configuration parameters of Series I’s 3, 5 and X3 are almost the same, except that the shell has been changed. I want to buy I4 for more than 100,000 yuan. Of course, it is still imported, and there is no need to do such a thing as buying it home. At first glance, the big nostrils are not mediocre. When I drive out, people are guessing at 600,000. I am sorry. " This design and personalized configuration make the BMW i4 a unique model, which not only satisfies the owner’s pursuit of face value, but also brings full pride.

BMW i4 in Weifang area is on sale! The lowest price is 327 thousand, and the quantity is limited

[car home Weifang Preferential Promotion Channel] At present, preferential promotion activities are being carried out in Weifang market, with the highest preferential margin of 112,900 yuan and the lowest starting price of 327,000 yuan. If you are interested in buying this model, you may wish to click "Check the car price" in the quotation form to get a higher discount.

潍坊地区宝马i4正在优惠!最低售价32.7万,数量有限

The BMW i4 adopts a unique front face design, and the air intake grille adopts a closed design, with sharp LED headlights, which shows a sense of modernity and technology. The body lines are smooth, and the waistline on the side is simple and dynamic, creating a sense of movement. The overall style is both luxurious and futuristic, which leaves a deep impression on people.

潍坊地区宝马i4正在优惠!最低售价32.7万,数量有限

Bmw i4 adopts streamlined design, with body size of 4785*1852*1455mm, wheelbase of 2856mm, front tread of 1601mm and rear tread of 1630mm. The side lines of the car body are smooth, with 18-inch rims, which are 245/45 R18 in front of tyre size and 255/45 R18 in rear of tyre size, showing a dynamic style as a whole.

潍坊地区宝马i4正在优惠!最低售价32.7万,数量有限

The interior design of BMW i4 is simple and exquisite, which highlights the perfect combination of luxury and technology. The steering wheel is made of genuine leather, which feels comfortable and supports manual adjustment up and down and back and forth to meet the needs of different drivers. The center console is equipped with a 14.9-inch touch screen with smooth operation and clear interface. Support the voice recognition control of multimedia system, navigation, telephone and air conditioner, which makes the driver more convenient during driving. The car is also equipped with multiple USB and Type-C interfaces, which provides convenience for passengers to charge. The front seats are made of imitation leather, genuine leather or leather /Alcantara mixed material, which provides a variety of choices. The front seats also have heating function, which brings passengers a comfortable driving experience. In addition, both the main seat and the auxiliary seat support a variety of adjustment methods, including front and rear adjustment, backrest adjustment, height adjustment, leg rest adjustment and lumbar support, to meet different driving needs. The front row is also equipped with wireless charging function, so that drivers do not have to worry about charging problems. The rear seats can be laid down in proportion, which increases the flexibility of storage space.

潍坊地区宝马i4正在优惠!最低售价32.7万,数量有限

The BMW i4 is equipped with a powerful motor, with a maximum power of 210 kW and a peak torque of 400 Nm, providing excellent power output and driving experience for drivers.

The owner of car home spoke highly of the BMW i4, and he specifically mentioned that the vehicle has excellent sound insulation effect, strong power performance, and the appearance is even more king-class. Especially the volcanic red interior, he feels that the design is unique and not inferior to Mercedes-Benz.